Button battery manual sealing machine/HMM-FKD-01
+
  • Button battery manual sealing machine/HMM-FKD-01

Button battery manual sealing machine/HMM-FKD-01


It is suitable for laboratory to disassemble button cell for picking up research. Different molds can also be used for battery sealing, pole piece pressing, battery powder pressing and other operations.
  • Product Description
    • Commodity name: Button battery manual sealing machine/HMM-FKD-01
    • Commodity ID: 1075412893035024384

    It is suitable for laboratory to disassemble button cell for picking up research. Different molds can also be used for battery sealing, pole piece pressing, battery powder pressing and other operations.

    Name and Model: Button Battery Manual Sealing Machine/HMM-FKD-01

     

    Specification Weight: Length 232 X Width 190X Height 330mm/About 30kg

     

    Configuration Mold: Standard configuration can be used for 20 series Button battery. It can also replace part of the mold parts and package 24 series and other button batteries

     

     

    Main features: 1. Built-in safety overflow oil valve, can adjust the pressure according to needs, and can set the upper pressure limit at the same time, in case of damage caused by pressure over due to misoperation, ensuring the safety of the machine. 2. Embedded pressure gauge, can observe and accurately control the size of the sealing pressure. 3. Using hydraulic drive, the pressure can reach 8T. 4. Special design of hydraulic structure, labor-saving operation. 5. Precision mold design to ensure accurate and reliable sealing molding, solid steel structure design, the use of stable and safe. 6. Small volume and convenient operation

     

    Technical parameters: 1. The operation strength of the hand rocker is less than 6kg 2. The pressure gauge reading of normal button cell disassembly pressure is about 80~100kg/cm2, and the machine has been set at about 80~100kg/cm2 before leaving the factory, if more pressure is required in special circumstances (the maximum pressure is 200 kg/cm 2 is about 8 tons of pressure) 3. Japanese imported mold materials are adopted. 4. Structural parts are made of high-strength chromium steel and alloy aluminum, and the surface will never rust after environmental protection electroplating and spraying treatment
     
    Keywords:
    • Button battery manual sealing machine/HMM-FKD-01

More Products


Customer Message